6
| LABNET VORTEMP 56 SHAKING INCUBATOR
Time Illuminated
Rotating the Encoder knob, right (+) or left (-) sets the run time to the desire value from 30 sec. to 99 min. 50 sec.:
99.5 = 99 min. 50 sec.
9.59 = 9 min. 59 sec.
0.30 = 30 sec.
If you want the unit to run continuously, set Time on hold. The timer is set to hold when HLd is displayed. Rotate the Encoder knob
under 0.30 or above 99.5 to set this hold function.
Push the Encoder knob to adjust the RPM setting.
34
Stop
Encoder
Power
Run
Time [min]
RPM [x10]
Temp [°C]
Start
RPM Illuminated
Rotating the encoder right (+) or left (-) sets the rotating speed to the desired value:
34 = 340 rpm
90 = 900 rpm
By turning the RPM setting below 20, the shaking function can be turned off. When the shaker is off, OFF is displayed.
OFF
Stop
Encoder
Power
Run
Time [min]
RPM [x10]
Temp [°C]
Start
Push the Encoder knob to adjust the Temperature setting.
37.4
Stop
Encoder
Power
Run
Time [min]
RPM [x10]
Temp [°C]
Start
Temperature Illuminated
Rotating the Encoder knob right (+) or left (-) sets the temperature to the desired value:
37.4 = 37.4°C
If you want to use the incubator without temperature control activated, turn the Encoder knob under 0.5 or above 99.5 until the
display reads OFF.
