LID-3300IP Ice Detector
D80186JE-3
Installation and Operating Instructions
Copyright ©
2016 Labkotec Oy
19/37
In the Site information window it is possible to define the name and
additional information of the site where this Ice Detector locates.
Site name becomes visible in the header of web user interface and
in all menus of RS-232 interface.
Network setup
Network setup information is visible here. An administrator is able
to change the IP address, default gateway address and netmask
address.
Note that the connection is lost if the IP address is changed.
Version information
Version information of control unit and sensor is available here.
User setup
User setup can be modified by an administrator. Password inquiry
is not enabled by default. Log in as an administrator to enable it.
When password inquiry is enabled, there are three user levels:
o
Visitor
is only able to view the status and parameter
values.
o
Tester
is able to activate Ice Alarm Test and Manual
Heating.
o
User (that has logged in) is able to change parameter
values, start an ice alarm test and start manual heating.
User cannot change network settings or change user
setup.
o
Administrator
is able to change parameter values, start
an ice alarm test, start manual heating, change network
settings and change user setup.
The default administrator password is:
a123
.
If the administrator password is changed and forgotten, it is
possible to restore the default administrator password through RS-
232 interface (see
Appendix C. Terminal commands
).
Event log
Event log is a new functionality in sw version v1.40 or later.
Event log shows history of various events in chronological order.
Ice detector saves 500 last events of four different type of events:
o
ALARMS
shows history of ice alarms
o
FAULTS
shows various fault events
o
SETTINGS shows parameter changes made by users
o
OTHER
shows general events
Complete list of log messages is available in
Appendix E
. Event log
messages.
NOTE! System clock must be set to enable event logging. See
paragraph Clock below for more information.
Clock
