LaBina Mini, Инструкция по эксплуатации

Страница: 15 / 26

15
15
+
+
+ +
–
–
Using the needle cartridge
Do not touch the cartridge’s taper when the handpiece is off or on.
Hold the handpiece firmly in your hands before turning it on. When you start
the motor in the handpiece, there may be some jerky movements in the
handpiece for a short time, these may result in people injuring themselves.
There is also the risk that the handpiece may be damaged by being dropped.
Setting the needle length
Set the handpiece’s stroke speed to average on the control unit and then
press the On button on the pigmentation device. Observe how far the needle
comes out of the needle nozzle.
Unscrew the cap which the needle cartridge was inserted into until the needle
sticks out as far as to suit your requirements.
CAUTION: Skin traumatisation
Skin traumatisation due to excessive working speed.
w If the working speed is too high, the risk of additional skin injuries increases.
When choosing the working speed, consider the condition of the customer’s
skin and the thickness of the skin in the area to be treated.
Filling the pigment ink into the needle cartridge
The pigment ink can either be filled through the filling opening in the needle
cartridge or drawn up through the taper.
CAUTION: Taper damage
Product damage due to impact with hard surfaces.
If you are using an ink pot, the taper may be damaged when sucking up the ink.
When inserting the needle into the ink, make sure that the taper does not
touch the edge or bottom of the ink pot.
Needles that have come into contact with the ink pot must not be used. If the
taper is damaged, the customer’s skin is injured more and it is to be expected
that the best treatment result cannot be achieved using a damaged taper.
Warning: Needle-prick injuries
There is a risk of a puncture injury.