LabelStation Pro XL, Руководство пользователя

Страница: 42 / 45

42
Label skews during
feed out Media guide not engaged with media. If label drifting to right side,
move label guide left. If label
drifting to left side, move label
guide right.
Labels skipped when
printing Label size is not specified correctly in
labelling software.
Sensor sensitivity incorrect.
Media sensor fouled with dust/debris. Re-specify software settings or
change label to match.
Recalibrate sensor.
Clear Gap/Black Mark sensor of
blockage.
Vertical printing
position of objects
on small label
incorrect Media sensor sensitivity not set correctly.
Label size does not match software
settings.
Shift Y parameter in LCD menu incorrect.
Vertical offset setting in printer driver
incorrect. Re-calibrate sensor sensitivity.
Set to correct label size and gap
size in labelling software.
Press [MENU] > [SELECT] x 3
> [DOWN] x 6 > [SELECT] to
fine tune Shift Y.
Horizontal printing
position of objects
on label incorrect Wrong label size specified in labelling
software.
Shift X parameter in LCD menu incorrect Set to correct label size and gap
size in labelling software.
Press [MENU] > [SELECT] x 3
> [DOWN] x 5 > [SELECT] to
fine tune Shift X.
Missing print on left
or right side of label Wrong label size specified in labelling
software. Set to correct label size and gap
size in labelling software.
RTC (real-time clock)
incorrect after printer
reboot Backup battery expired. Check presence and condition
of battery on main PCB (main
printed circuit board).
Multi interface board
not working Installation incorrect. Check PCB plugged into right
connector.
Power and Error
LEDs
blinking rapidly Printer power switched off and on too
quickly. Switch off printer and wait until
all LEDs are off before switching
printer on again.
Label or ribbon
wrinkling Print head pressure incorrect.
Ribbon installation incorrect.
Label media installation incorrect.
Print density incorrect.
Media feeding incorrectly. Set print density and speed for
optimum print quality.
Ensure label is engaging with
media guide.
All these settings are described
throughout this manual.
Gray line throughout
all Labels printed Print head dirty.
Platen roller dirty. Clean printer parts as
appropriate.
LabelStation Pro XL
continued…