LabelStation Pro XL, Руководство пользователя

Страница: 34 / 45

34
4.2 Printer Function
(Calibrate sensor, Ethernet setup, RTC setup………)
1. Select the PC interface connected to the printer.
2. Click the “Function” button to the required setting.
3. The detail functions in the Printer Function Group are listed as below.
Function Description
Calibrate Sensor Calibrate the sensor specified in the Printer
Setup group media sensor field
Ethernet Setup Setup the IP address subnet mask gateway for
the on board Ethernet (Please refer to next
section)
RTC Time Synchronize printer Real Time Clock with PC
Print Test Page Print a test page
Reset Printer Reboot printer
Factory Default Initialize the printer and restore the settings to
factory default
Dump Text To activate the printer dump mode.
Ignore AUTO.BAS Ignore the downloaded AUTO.BAS program
Configuration Page Print printer configuration details
Note:
For more information about Diagnostic Tool, please refer to the diagnostic utility quick start
guide in the CD disk \ Support directory.
5 Setting Ethernet by Diagnostic Utility
(Optional for
LabelStation Industrial)
The Diagnostic Utility is found on the CD Support directory. Users can use the Diagnostic
Tool to setup the Ethernet by RS-232, USB and Ethernet interfaces. The following contents
will instruct users how to configure the Ethernet by these three interfaces.
Interface
Printer Status
Printer Functions
Features Tab
Printer Setup