LabelStation Pro XL, Руководство пользователя

Страница: 10 / 45

10
2.6 Loading Media
1. Lift printer cover open.
2. Push the print-head release lever to open the print-head mechanism.
3. Remove ONE label roll-guard.
4. Place media roll on label supply spindle.
5. Replace label roll-guard.
Note: Make sure the media is set at the centre of the spindle.
6. Pull the leading edge of the label forward through the media guide bar past media sensor, and
place the leading edge onto the platen roller.
7. Adjust the label guide to fit label width.
8. Close print head mechanism, making sure the latches are engaged properly.
PRINT-HEAD
RELEASE LEVER
LABEL ROLL-GUARDS
MEDIA GUIDE BAR
LABEL GUIDE
MEDIA (LABEL) SENSOR