LabelStation Pro 240
Page 17 of 67
2. Push the print-head release lever (in direction
indicated) to open the print-head carriage.
3. Move the label roll guard horizontally to the
end of label spindle then flip it down.
4. Place the roll of label on the label supply spindle. Flip up the label roll guard.
Note:
When inserting the 3 inch core adapter to the spindle, please make sure the arrow direction is as
shown below. When using a 1 inch core label, please remove the 3 inch core adaptor from the label
supply spindle.
Print-head carriage
1
3
2
Label roll guard
3 inch label core
1 inch label core
