Labconco Purifier 3970200 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 65

Labconco Purifier 3970200 Скачать руководство пользователя страница 24

20

Chapter 4: Performance Features and Safety Precautions

Product Service 1-800-522-7658

11.

Filter Clamping Bolt

evenly seals the HEPA filter to the

frame of the enclosure. See Figure 4-1 and 4-2.

12.

Control Panel

. The control panel, which is located above

the sash, contains the filter pressure gauge, control switches
and electronics. See Figure 4-1.

13.

HEPA (High Efficiency Particulate Air) Filter

is rated to

remove 99.99% of all particles 0.3 micron in size. See
Figure 4-2.

14.

Lamp Ballast (Not Shown)

for the fluorescent lamp is

located behind the control panel.

15.

UV (Ultraviolet) Lamp (Not Shown)

, found only on some

Clean Bench models, allows the operator to surface
disinfect the work area of the enclosure when it is not in
use. The UV light rays will not penetrate the plane of the
sash and lower air foil.

16.

UV Sash Closure

(Optional)

provides added safety to

prevent access inside the enclosure. See Figure 4-3.

17.

Accessory Work Surface

is dished and contoured to fit the

dimensions of the Clean Bench to contain spills.

18.

Upper Diffuser Screen

provides protection for the HEPA

Filter and promotes even distribution of downflow air. See
Figure 4-2.

19.

Prefilter (roughing)

enhances the life of the HEPA filter

by trapping large particles. It should be replaced quarterly.

Safety Precautions

1.

Although the Clean Bench has been engineered to maintain
Class 5 air conditions, caution should always be used while
working. Prior to using the Clean Bench, check to make
sure that the blower is operating and periodically ensure
that air is flowing through the enclosure at its specified
downflow velocity of 30 to 65 fpm. The use of an airflow
monitor is recommended to alert the user to a problem with
airflow.

«
...
22
23
24
25
26
...
»

Содержание Purifier 3970200


































































Отзывы:

Нет отзывов