manualshive.com logo in svg

Labconco Purifier 3970200, Руководство пользователя, Страница: 13 / 65

Поделиться
Скачать
Labconco Purifier 3970200 Скачать руководство пользователя страница 13

 

 

9 

Chapter 3:  Getting Started 

Product Service  1-800-522-7658 

 

Unpacking the Clean Bench 

 
Carefully remove the shrink-wrap or carton on the Clean Bench 
and inspect it for damage that may have occurred in transit.  If 
damaged, notify the delivery carrier immediately and retain the 
entire shipment intact for inspection by the carrier. 
 

DO NOT RETURN GOODS WITHOUT THE 
PRIOR AUTHORIZATION OF LABCONCO.  
UNAUTHORIZED RETURNS WILL NOT BE 
ACCEPTED. 
 
IF CLEAN BENCH WAS DAMAGED IN 
TRANSIT, YOU MUST FILE A CLAIM 
DIRECTLY WITH THE FREIGHT CARRIER.  
LABCONCO CORPORATION AND ITS 
DEALERS ARE NOT RESPONSIBLE FOR 
SHIPPING DAMAGES. 

 
Do not discard the packing material until you have checked all of 
the components and tested the Clean Bench. 
 
We recommend that you do not remove the Clean Bench from its 
shipping container until it is ready to be placed into its final 
location.  Move the Clean Bench by placing a flat, low dolly under 
the shipping skid, or by using a floor jack. 
 
 

Do not move the Clean Bench by tilting it onto a 
hand truck. 

 

Installing the Vertical Clean 
Bench on a Supporting Structure 
and Work Surface 

 
Use caution when lifting or moving the Clean Bench. 
 
When installing the Clean Bench onto a chemical-resistant work 
surface or benchtop, ensure that the structure can safely support the 
combined weight of the Clean Bench and any related equipment.   

The United States 
Interstate Commerce 
Commission rules 
require that claims be 
filed with the delivery 
carrier within fifteen (15) 
days of delivery. 

! 

)

 

)

 

Содержание Purifier 3970200


































































Отзывы:

Нет отзывов