Labconco Protector Echo, Руководство пользователя

Страница: 56 / 112

56
CAP
FILTER
PACKAGING
BOX TO CHECK
FOR CAP IF MISSING
The following safety precautions must be followed by all personnel handling the
equipment and filtration columns:

It is recommended you follow all of your existing lab safety protocols as they
apply to this procedure.

2 persons required for this procedure.

Read instructions carefully before attempting.

Do NOT have fans running during this process.
Step 1
Turn the filtered hood completely off and disconnect the power plug. Remove the front
panel (see
Section 8: Front Panel Removal ) of the filtered hood and place nearby but
out of the way of the filtered hood. This will expose the filtration column technology you
will be working with.
Step 2
Identify the filtered hood you have and order the correct filters but in type and quantity
for replacing. Determine your model number which is a M1 (3 FT), M2 (4 FT), M3 (5
FT), M4 (6 FT), or M5 (8 FT). These numbers are based on how many stacks of
technology that you have on top of your filtered hood from left to right and the filtered
hood width.

Look at your filtered hood and count the stacks of technology from left to right

You will have 1, 2, 3, 4, or 5 stacks for 3 FT, 4 FT, 5 FT, 6 FT, and 8 FT filtered
hoods.

Match that number to M1, M2, M3, M4, or M5.

This information will help you follow this procedure when it applies to your model
M1, M2, M3, M4, M5.
All primary filters must
be replaced at the same
time.
See the Section 9:
Accessories for ordering
details. Make sure you
have the new filters on
hand before following the
next steps.
Step 3
To unpack the new filters,
carefully remove from the
packaging. Keep track of
all parts including the caps
that come with the filters.
The Neutrodine filters are
shipped directly from the
Figure 8-13