Labconco Fiberglass 30 Series, Руководство пользователя

Страница: 23 / 52

Chapter 4: Performance Features & Safety Precautions
Product Service 1-800-522-7658 19
Original instructions
8. Curved Air Foil allows air to sweep the work surface for maximum
containment.
WARNING: Do not lift hood in this area. Hood is to be lifted only by
side or back.
AVERTISSEMENT: Ne pas soulever le capot dans ce domaine. Hotte
doit être levée que par côté ou à l'arrière.
9. Corner posts provide maximum visibility and the flexibility to add
services after installation.
10. All hoods are factory prepared for up to 3 service fixtures . Field
installed by removing side access panel.
11. Removable side access panel for servicing valves and electrical
connections.
12. All hoods are factory prepared for one electrical duplex. A duplex can
be field mounted on the right corner post. Receptacles are field-wired to
the single point junction box.
13. Shipped fully assembled and eliminates the need for costly onsite
assembly.
14.
Accessory Guardian™ Digital Airflow Monitor
or Guardian Jr.
Monitor continuously monitors face velocity. An audio/visual alarm alerts
the user to low airflow conditions. The right corner post is factory
prepared to accommodate the Guardian Monitor (sold separately).
15. Frame of epoxy-coated steel and aluminum is durable and corrosion
resistant.
16. Exhaust connection . The hood features 6" (6.625" OD pipe) exhaust
connections sized to allow for a minimum static pressure loss through the
hood structure while providing a good transport velocity through the
exhaust system.
17. Single point junction box provides a single connection point for electrical
wiring connections.
18. Convenient integral blower motor is readily accessible on integral blower
models.
!