3
Introduction
Welcome to the Bottle top dispenser User Manual. Users should read this manual carefully,
follow the instructions and procedures, and beware of all the cautions when using this
instrument.
Warranty
This instrument is warranted for a period of 12 months from the date of invoice. All warranties
are null and void if the product has been misused, modified or repaired by unauthorised
personnel, if the defects are caused by negligence (instruction manual, maintenance) or by
normal wear and tear. Use only original manufacturer’s accessory/spare parts.
Delivery
This unit is supplied with 1 x main unit, user manual, discharge tube, mounting tool, filling tube
and adapters of PP of the following sizes:
Nominal vol. tube
Adapter, PP
Filling
0.5 – 5, 1 – 10, 2.5 – 25, 5 - 50
GL 25, GL 28, GL 32,GL 38, S40
220 mm
1.
Safety Instructions
This instrument may be used with approved hazardous materials (refer to chemical
compatibility chart), operations, and equipment. This manual does not purport to address all
of the safety problems associated with its use. It is the responsibility of whoever uses this
instrument to consult and establish appropriate safety and health practices and determine the
applicability of regulatory limitations prior to use.
a.
Follow the general instructions for hazard prevention and safety regulations, e.g., wear
protective clothing, eye protection and gloves.
b.
Observe the reagent manufacturer’s information.
c.
Every user must be acquainted with this Operating Manual before operation.
d.
Use the instrument only for dispensing liquids, with strict regard to the defined Operating
Exclusions and Limitations. If in doubt, contact the manufacturer or supplier.
e.
When dispensing, the discharge tube must always point away from the user or any other
person. Avoid splashes. Only dispense into suitable vessels.
f.
Never carry the mounted instrument by the cylinder sleeve or the valve block. Breakage
or loosening of the cylinder may lead to personal injury from chemicals.
g.
Never press down the piston when the closure cap is pushed on.
h.
Never remove the discharge tube while the cylinder is filled.
i.
Use smooth gentle movements to operate the piston upwards and downwards.
j.
Use only original manufacturer’s accessories and spare parts. Don't carry out technical
modifications.
k.
Before using check the instrument for visual damages. In case of trouble (e.g., piston
difficult to move, sticking valves or leakage), immediately stop dispensing. Clean the
instrument according to the cleaning instructions.
Содержание 550.001.305
Страница 16: ...16...
