background image

Form No. Z2323

Rev. 06.26.10

INSTALLATION ANd OPERATION INSTRUCTIONS

ARCTICOLd dRAfT dISPENSER

Table of Contents

Preparing the Cabinet for Use

Specifications ........................................................2

Initial Setup............................................................3

Electrical ................................................................3

Tapping

Connecting the Keg Coupler.................................4

Tapping the Keg/Priming the System ...................4

Connecting the Regulator .....................................5

Adjusting Gas Flow ...............................................5

CO

2

 Leak Test .......................................................5

Replacing a CO

2

 Gas Cylinder..............................5

Handling CO

2

 Gas .................................................5

Cleaning

Cleaning the Beer Lines ........................................6

Cleaning the Cabinet .............................................6

General Information

How to Pour a Perfect Glass of Beer ...................7

Wiring Diagrams ....................................................8

Glycol Loop Diagrams ...........................................9

Preventative Maintenance ...................................10

8300 West Good Hope Road  •  Milwaukee, WI 53223  •  Phone 414-353-7060  •  Fax 414-353-7069

Toll Free 800-558-5592  •  E-Mail: [email protected]  •  www.Perlick.com

IMPORTANT INfORMATION

To  register  your  product,  visit  our  web  site  at  

(www.perlick.com).  Click  on  “Commercial”,  then 

“Service”.  You  will  see  the  link  to  “Warranty 

Registration Form”. You must complete and submit 

this  form  or  the  installation  date  will  revert  back  to 

the  ship  Date. 

The  unit  comes  with  a  one  year 

parts warranty.

This manual has been prepared to assist you in the 

installation of your ArctiCold Draft Dispenser and to 

acquaint you with its operation and maintenance.
We  dedicate  considerable  time  to  ensure  that  our 

products  provide  the  highest  level  of  customer  

satisfaction.  If  service  is  required,  your  dealer  can 

provide  you  with  a  list  of  qualified  service  agents. 

For  your  own  protection,  never  return  merchandise 

for credit without our approval.
We  thank  you  for  selecting  a  Perlick  product  and 

assure  you  of  our  continuing  interest  in  your 

satisfaction.

WARNING:  When  lifting,  the  full  weight  of  the 

cabinet must be supported. Lift from the cabinet 

base  and  not  from  the  top.  Improper  lifting  can 

result  in  severe  damage  to  the  cabinet. 

MODEL NOS.

DC90ACLT

Содержание DC90ACLT













Отзывы: