Shock Dyno
Version: 1.0.23241
Page 18/62
The motor driver can be found inside the Shock Dyno. Remove the top cover using
4-6 screws (depending on the different Shock Dyno model).
Figure 12
Once the cover is open, you should see the AC Motor driver on the side of the Dyno towards the
back, next to the motor.
It is likely that the RFI pin (jumper) is located on the left side of the AC Driver. In that case, you will
have to remove the 2 screws from the side of the Dyno that hold the plate on which the AC Driver
is mounted.
