INSTRUCTION MANUAL FOR THE INSTALLER
LSI 001 -EN- REV. 06
57
This option makes it possible to set a range of values, for which the coffee delivery is considered correct.
The values are given in % and they refer to a recorded delivery time set during doses setting in the relevant
menu.
2. Use the buttons
and
to change the percentage value.
NOTE. Setting a lower % value means stricter control over coffee delivery time according to the preset
time, whereas if a higher % value is set, there is a softer control over the coffee delivery time.
Setting range:
10-35%.
At the end of the programming phase for
delivery TIME CONTROL, as soon as the last setting has been
confirmed with the button
, the display will show the flashing symbol
.
• ON/OFF BUTTON SETTING MENU
1. Press and hold down the button
for about
5 seconds; the symbols
and “
p” will flash.
2. Press the button
; the display will show the symbol “
t” flashing.
3. Press the button
again; the display will show the symbols
4
3
2
1
flashing.
4. Press the button
; the display will show the symbol “
th” flashing.
5. Press the button
; the display will show the symbols
flashing.
6. Press the button
again; the display will show the words “
OFF:On” flashing.
1. Press the button
; the display will read:
If “
ON” (flashing) is used to confirm, the manual free flow button
is activated (coffee delivered
with this selection cannot be counted in the delivered coffee counter menu). If this button
is used to
select “
OFF” (flashing) and the datum is confirmed with manual delivery
, it is deactivated.
