INSTRUCTION MANUAL FOR THE INSTALLER
50
LSI 001 -EN- REV. 06
NOTE. If the appliance is controlled by timer, the partial counters are automatically reset every
time you switch on the appliance by timer again.
If the deliveries count should exceed 99999 the display will show, for example:
Where the number “
1” indicates hundreds of thousands (read 100943).
6. Press the
button to quit the Counter menu.
AppLIANCE SETTINGS
The appliance is provided with preset data (default data).
These data are:
• BOILER TEMPERATURE: 120 °C
• THERMIC DIFFERENTIAL (∆T): 1 °C
• COFFEE DOSES: 1st DOSE = 90 PULSES
2nd DOSE = 100 PULSES
3rd DOSE =145 PULSES
4th DOSE = 160 PULSES
• BUILT-IN PUMP PRESSURE (when present): 9 BAR
• FREE FLOW DELIVERY GROUPS ENABLED
• TIMER FUNCTION NOT ENABLED
• CONTROL ON COFFEE DELIVERY TIME NOT ENABLED
• TYPE OF BOILER LEVEL CONTROL: CONDUCTION PROBE
MENU pROGRAM OF THE AppLIANCE
This appliance is run by a program made of 7 main menus:
•
TIMER MENU (Symbol
flashing): this menu is used to set the switching on and off time of the
appliance for each day of the week.
•
TEMpERATURE MENU (Symbol “t” flashing): this menu is used to change the data for the heating
system (boiler temperature and “
dt”).
•
COFFEE DOSES SETTING MENU (Symbols
4
3
2
1
flashing): this menu is used to set
the coffee delivery doses.
•
SETTING MENU FOR HOT WATER DELIVERY DOSE (Symbol “th” flashing): this menu is used to
set the time for hot water delivery for infusions.
•
SETTING MENU FOR COFFEE DELIVERY TIME CONTROL (Symbol
flashing): this menu is
used to set control over coffee delivery times.
