ENGLISH
59
An automatic defrost is programmed on your cellar. There is no impact for wines stored in the cellar
during the defrosting phase. During defrost; the compressor and the fans will be off.
Changing the carbon filter
Your wine cellar is equipped with a carbon filter, we advise you to replace it once a year. To replace it,
all you have to do is pull it out from inside the cellar and replace it with a new filter.
If you go on vacation
•
Short stays: let your cellar operate during your stay if it lasts less than 3 weeks.
•
Long stays: if your device is not to be used for several months, remove all bottles and
accessories, turn off and unplug the device from the power outlet. Clean and dry the inside
and outside of the appliance thoroughly. Also leave the door open, blocking it if necessary, to
prevent the formation of condensate, odors and mold.
If you need to move your wine cellar
•
Unplug your cellar before any operation.
•
Remove all bottles from the cellar and secure the moving parts.
•
To avoid damaging the leg leveling screws, screw them all the way into their base.
•
Close the door completely.
•
Move the device to a vertical position preferably or note from the inscriptions on the
packaging, the direction in which the device can be laid. Also protect your device with a blanket
or similar cloth.
7. IN THE EVENT OF A BREAKDOWN
Despite the care we take during production, a breakdown can never be totally excluded. Before
contacting your retailer’s after
-sales department, please check that:
The appliance is properly plugged in
There is not a power cut in progress
The breakdown is not one of those described in the table at the end of this manual
IMPORTANT: if the power cable supplied is damaged, it must be replaced by the manufacturer, a
service centre approved by the brand or the retailer. In all events, it must be replaced by qualified
personnel in order to avoid any risk of injury.
IF THESE CHECKS REVEAL NOTHING, THEN CONTACT YOUR RETAILER’S AFTER
-SALES DEPARTMENT.
CAUTION!
Unplug the appliance before carrying out any maintenance or repair work.
8. TROUBLE SHOOTING
Many problems can be solved easily, saving you the cost of a phone call to service. Try to resolve your
problem by following the suggestions below before calling for service.
Содержание APOGEE150
Страница 184: ...184 www lasommeliere com...