37
ENGLISH
6.2 Drawing steam
A jet of steam, which can be used to foam milk or to heat other liquids, comes out of the steam drawing spout
as follows: by raising or lowering the lever you attain the maximum flow (the lever stops in the maximum po-
sition. To stop the flow of steam, place the lever back in its original position).
5IFTUFBNFSNVTUCFVTFEXJUIDBSFUIFDPOUBDUPGUIFTLJOXJUIUIFTUFBNTQPVUPSXJUIUIFKFU
of steam itself can cause serious burns. Grip the anti-burn sheath to change the position of the
TUFBNESBXJOHTQPVU/FWFSBJNUIFKFUPGTUFBNBUQFSTPOTPSBUPCKFDUTXIJDIEPOPUIBWFUP
do with the use as described in this manual.
/PUF
#FGPSFVTJOHUIFTQPVUGPSESBXJOHTUFBNESBJOPVUJOUPUIFUVCBOZDPOEFOTBUJPOXIJDINBZIBWFGPSNFEJO
JU"GUFSVTJOHUIFTQPVUDMFBOJUQSPQFSMZXJUIBNPJTUDMPUIBOEJGOFDFTTBSZEJTDIBSHFBOZSFTJEVFSFNBJOJOH
JOTJEFJUJOUPUIFUSBZ
6.3 Drawing hot water
Hot water is drawn by the appropriate spout and can be used to prepare infusions, tea, camomile tea, to heat
cups, to add water to an espresso and to obtain American-style coffee, and so on.
Modelli NEW 105 S
The hot water is drawn from the spout
,
(figure 2) by turning the knob
9
(figure 2) counterclockwise, and it can
be used to prepare infusions, tea, camomile, etc.
The operation of the valve is similar as with the steamer.
Modelli NEW 105 E
The hot water is drawn automatically (two “quantities” of hot water can be pro-
grammed electronically) by pressing buttons
G
or
I
once. The central button
H
is
used to draw hot water manually or to stop the automatic flow at any time
.
6.4 Cup heater (optional)
The cup heater is used to increase heating of the upper cup support surface (by means of an electrical he-
ating element). Use the appropriate switch to activate or de-activate the cup heater. The cup heater heating
element is equipped with a working thermostat that controls the temperature of the cup support surface.
7. Programming the NEW 105 E models
G
H
I
D
E
F
O
P
Q
B
A
C
G
H
I
L
M
N
