La Pavoni DAYTONA 1-POWER, Технические инструкции

Страница: 52 / 82

383033GB Pag. 52 November 2003
a)
FUNCTION OVER
Remove the owner’s card, the display shows:
INSERT CARD
XXXXXXXX
Where XXXXXXX indicates
TECHNICIAN
if the card inserted to enable the programming of waiter’s card was the technician’s
OWNER if the card inserted to enable the programming of waiter’s card was the owner’s
Insert the requested card, the display shows:
SYSTEM PROGRAMMING
SMART CARD PROGRAMMING
b)
CARD CODE
NOT VALID
This message is displayed if the inserted card code does not correspond to that of the card.
Remove the card to be re-programmed, the display shows:
INSERT CARD
XXXXXXXX
Where XXXXXXX indicates
TECHNICIAN
if the card inserted to enable the programming of the waiter’s card was the technician’s
OWNER if the card inserted to enable the programming of the waiter’s card was the owner’s.
Insert the requested card, the display shows:
SYSTEM PROGRAMMING
SMART CARD PROGRAMMING
Repeat the procedure.
WARNING:
After 4 (four) failed attempts the card can no longer be used
C)
BROKEN CARD
This message is displayed if one has repeatedly tried to programme the card and a wrong code has been entered. The
card can no longer be used.
Press the key N°16 (3.4.5…X), the display shows:
SYSTEM PROGRAMMING
SMART CARD PROGRAMMING
9.5) Credit card creation
The owner and technician’s card can enter this programming level.
The display shows:
CREDIT CARD
CREATION
Press the key N°16 (3.4.5…X) to confirm entering the environment.
The display shows:
INSERT CARD
TO BE CREATED