La Pavoni DAYTONA 1-POWER, Технические инструкции

Страница: 42 / 82

383033GB Pag. 42 November 2003
3.1) Milker cleaning time programming
MILKER CLEANING
PROGRAMMING
CLEANING TIME XX s
Where XX s indicates the Milker cleaning time in seconds; variable value between 1-120 s; 60 s set up standard value.
WARNING:
During Milker cleaning the solenoid valve opens at signals; this function has been implemented to optimise Milker
cleaning.
4) SET-UP ENCODER
Only the technician’s card can enter this programming level
The display shows:
SYSTEM PROGRAMMING
SET-UP ENCODER
Press the key N°16 (3.4.5…X) to confirm the operation.
Press the key N° 12 (gost1) to return to the previous environment and/or exit.
The display shows:
GROUP MANUAL MOVEMENTS
HIGHER MOTOR XXX
MOTOR EXPELLER
LOWER MOTOR XXX
Where XXX indicates the impulses of the upper and lower motor.
Press the keys:
N°1 to move the upper piston
N°3 to move the lower piston
Please Note : this function allows to read the maximum strokes of the two pistons:
- starting from stand-by position, move the lower and upper motors to their mechanical ends of stroke (see
position 1-2 on NT 0068).
- the maximum stroke of each piston is shown in the display by the related number of pulses.
5) GROUP MANUAL MOVEMENTS
Please Note : This function will be displayed only after having set the encoder
Only the technician’s card can enter this programming level
The display shows:
SYSTEM PROGRAMMING
GROUP MANUAL MOVEMENTS
Press the key N°16 (3.4.5…X) to confirm the operation.
Press the key N° 12 (gost1) to return to the previous environment and/or exit.
The display shows:
GROUP MANUAL MOVEMENTS
HIGHER MOTOR
MOTOR EXPELLER
LOWER MOTOR
Press the keys:
N°1 to move the upper piston
N°2 to move the expeller
N°3 to move the lower piston
WARNING:
Once the desired movement has been completed, by pressing the same button, the opposite movement is carried out.