La Pavoni DAYTONA 1-POWER, Технические инструкции

Страница: 51 / 82

383033GB Pag. 51 November 2003
SYSTEM PROGRAMMING
ENABLE/DISABLE WAIT.CARD
N° XX YYYYYYY
Where N° XX indicates the number of the waiter’s card and YYYYYYYY indicates whether the card is free or blocked.
Press the key N°13 (1x) or N°14 (2x) to display the desired card number.
Press the key N°16 (3.4.5…X) to set the state of the card (BLOCKED - FREE) the display shows:
SYSTEM PROGRAMMING
ENABLE/DISABLE WAIT.CARD
N° XX FREE
Press the key N° 12 (gost1), the display shows:
SYSTEM PROGRAMMING
ENABLE/DISABLE WAIT.CARD
WARNING:
a) The number of the available waiter’s cards is 25.
b) The released number allows creating a new waiter’s card. Warning: in this case, it is possible to create a new card
with the same number of an already card existing.
c) If it is carried out the PRESET CONFIGURATION DATE , alls the waiter’s cards previously programmed will not be
reset .
9.4) Owner’s card creation
The owner and technician’s card can enter this programming level.
The display shows:
OWNER’S CARD
CREATION
Press the key N°16 (3.4.5…X) to confirm entering the environment.
The display shows:
INSERT CARD
TO BE CREATED
Remove the technician or owner’s card, and insert the card to be programmed.
Once the card to be programmed has been inserted, the display will automatically show the machine device code:
CARD CODE
X XXXX
Insert the code relevant to the card to be programmed, (the card code might be different from the device code).
To insert the card code, proceed as follows:
The blinking
X number indicates the first figure of the code to be modified:
Press the key N°13 (1x) or N°14 (2x) to modify the figure.
Press the key N°16 (3.4.5…X) to confirm the modification.
Press the key N°15 (gost2) to enter the next level without saving the modification carried out.
Press the key N° 12 (gost1) to return to the previous environment and/or exit.
After having modified the first figure and confirmed the operation, the display shows:
CARD CODE
X X XXX
Where the blinking
X number indicates the second figure to be modified, etc. etc.
Repeat the above operations for all the other figures.
WARNING:
a) If the card is new, the card code to be entered is 21845 .
b) If the card has already been used in another device, you must necessarily remember the card code previously
programmed; the operator has to remember the programmed code number of the card. Without the card code the
card cannot be used.
Once the card code has been entered, the display shows: