La Pavoni DAYTONA 1-POWER, Технические инструкции

Страница: 49 / 82

383033GB Pag. 49 November 2003
WARNING:
a) If you modify the device code, you also have to modify the code of the cards enabled to the machine use.
b) If you press the key N° 12 (gost1), you exit the programming level and all modifications carried out will be cancelled.
9.2) Waiter’s card creation
The owner and technician’s cards can enter this programming level.
The display shows:
WAITER’S CARD
CREATION
Press the key N°16 (3.4.5…X) to confirm entering the environment.
The display shows:
INSERT CARD
TO BE CREATED
Take out the owner or technician’s card, and insert the card to be programmed.
When the card to be programmed is inserted, the display will automatically show the machine device code:
CARD CODE
X XXXX
Insert the code relevant to the card to be programmed, (the card code might be different from the device code).
To insert the card code, proceed as follows:
The blinking
X number indicates the first figure of the code to be modified:
Press the key N°13 (1x) or N°14 (2x) to modify the figure.
Press the key N°16 (3.4.5…X) to confirm the modification.
Press the key N°15 (gost2) to enter the next level without saving the modification carried out.
Press the key N° 12 (gost1) to return to the previous environment and/or exit.
After having modified the first figure and confirmed the operation, the display shows:
CARD CODE
X X XXX
Where the blinking
X number indicates the second figure to be modified, etc. etc.
Repeat the above operations for all the other figures.
WARNING:
a) If the card is new, the card code to be entered is 21845 .
b) If the card has already been used in another device, you must necessarily remember the card code previously
programmed; the operator has to remember the programmed code number of the card. Without the card code the
card cannot be used.
Once the card code has been entered, the display shows:
WAITER’S CARD
N° XX
Where XX indicates the available number of the waiter’s card to be assigned to the card itself.
Press the key N°13 (1x) or N°14 (2x) to modify the figure.
Press the key N°16 (3.4.5…X) to confirm the modification.
Press the key N°15 (gost2) to enter the next level without saving the modification carried out.
Press the key N°12 (gost1) to return to the previous environment and/or exit.
WARNING:
a) The number of the available waiter’s cards is 25.
b) If a waiter’s number has already been assigned to one card, it will not be displayed.
c) If all the waiters’ numbers are already taken, the procedure of waiter’s card creation is not enabled.
d) To create new waiters’ cards, first release one waiter’s card number (see relevant procedure), and create the
waiter’s card. Warning: in this case two waiters’ cards with the same number have been created.
Once the number of the waiter’s card has been entered, the display shows: