La Marzocco Linea PB, Руководство по эксплуатации

Страница: 22 / 64

EN
21
Display Operating Procedure
Description
Programming Mode
Start Up Procedures
The following is the procedure for turning on
the power to the espresso machine.
• Please follow the procedures carefully to
avoid any damage to the espresso machine.
• Proceed checking for water connection to
the espresso machine.
• Proceed making sure you have filled the
boilers.
1
3
2
Turn the Main Switch to the 1 position.
The message shown to the left will be displayed when the espresso machine is switched on.
To complete the start up process, press any button. The screen shown to the left will be displayed. The rectangles next
to CB and SB indicate the warming up of the water contained in the boilers. When the set temperature is reached,
these rectangles turn off and all the lights of the buttons turn on. Now the machine is ready for use. During the normal
operation of the machine, the flashing of the rectangles indicates the intermittent heating necessary for maintaining
the temperature.
NOTE: Ensure all air is removed from the group prior to staring the espresso machine.
This only needs to be completed once during the initial setup or
when water is drained from the coffee boiler.
Instructions for bleeding the groups of air can be found in the Installation Guide.
Turning the Espresso
Machine On
HAZARDOUS VOLTAGE DISCONNECT FROM POWER
SUPPLY BEFORE SERVICING
WARNING
OFF 00:00
LaMarzocco 00:00
CB
O
93.8
°
C SB
O
OFF 00:00