La Marzocco Linea PB, Руководство по эксплуатации

Страница: 16 / 64

EN
15
7. De-commissioning and Demolition
1) De-commissioning and demolition
Start by setting the main switch to the
“0” or OFF position.
Disconnecting from the power outlet
Disconnect the espresso machine from
the electrical network by switching off
the associated circuit breaker or circuit
protection device. Remove the power
supply cord from the power connection.
Remove the Pump Motor Power Cord
from the water pump motor.
Disconnecting from the water system
Shut off the water supply by closing the
specific tap located upstream of the
water filter/softener inlet. Disconnect the
water pipe at the water filter/softener
inlet. Remove the hose connecting the
espresso machine to the water pump.
Remove the reinforced plastic tubing on
the drain connection.
At this point, the machine may be
removed from the bar, being very careful
not to drop it or squash your fingers.
The machine is made out of various
materials and therefore, if you do not
intend to put it back in service, it must
be taken to a special disposal company
which will select the materials which can
be recycled and discard the others.
Current regulations make it illegal to
discard such machine by leaving it
on public grounds or on any private
property.
Recycling notice: Warning for the
protection of the environment.
Used Electrical and electronic waste
contains hazardous but also valuable
and scarce materials which should be
recovered and recycled properly. We
kindly ask that you contribute to the
protection of the environment and
natural resources by delivering used
equipment to the relevant recycling
locations if such locations are available in
your country.