EN
114
Display
Operating Procedure
Description
“Technical” Programming
Coffee Boiler
Settings
CB1 Offset
3.0°C
5
Press the T3 button to enter the menu, move with the buttons T1
and T2
to set the desired temperature,
press the
T3 button
to confirm the value. In the case of espresso machine with 4 groups you can set this
value also on the coffee boiler 2.
Coffee Boiler
Exit
6
Press the T3 button to return to the “Technical” programming.
7
Press T1 or T2 to continue with the programming of the other parameters.
Menu
Press B3 to Exit
8
To exit the menu move between the parameters using the buttons T1
and T2
until the exit menu is displayed.
Press the T3 button
to exit the menu and return to the normal use of the espresso machine.
Coffee Boiler
• The OFFSET parameter is used to
calibrate the coffee boiler temperature
system to ensure the display temperature
accurately represents the temperature
of the water exiting the group head.
• This parameter is preset at the factory
based upon initial tests of this espresso
machine.
• It is not recommended that this number
is changed. Changes to this parameter
can cause unexpected results.
• It is important to write down this value
before making changes to be sure you
can return to the factory programming if
unexpected results occur. Each machine
may have a different value as it is set
individually.
Enter Password
******
