EN
10
• Safety device, based on an expansion
type
mechanical
valve,
with
ounteracting spring adjusted to 13 bar.
• Testing: Hydraulic test at 18 bar
performed on ready-to-use small boilers,
at our factory.
• Brewing groups
They consist of a precision casting made
of stainless steel. The brewing group
accepts the portafilter used to hold the
ground coffee; the espresso flows through
the brewing group, through the portafilter
basket, through the portafilter spout, and
into the cup(s) after the brewing button
has been pressed.
• Exterior cover
The exterior consists of painted and
stainless sheet steel panels. To provide
good aesthetics, to optimize ergonometrics
for the operator and to reduce the chance
of damage to a minimum.
• Water pump
The rotary vane pump, is installed on the
water supply tubing and is set up to operate
anytime the coffee groups are activated,
and through an autofill system whenever
the water boiler needs to be replenished.
• Water sensor
The probe that analyses the water entering
the machine (AQUATOP) performs a very
precise reading of the TDS and total
hardness.
However, if a water softener with salt
regeneration (Na + ion cationic resins) is
installed upstream from the machine, this
reading is not as reliable and precise.
In this case, we recommend you to
consult your local technician for questions
regarding water treatment.
• FCC certification (U.S.A. and CANADA only)
The espresso machine is equipped with a
dedicated radio module that meets FCC
and ISED certification requirements.
FCC ID: 2AZUJ-SYS-C60-LMC1
IC ID: 27093-SYSC60LMC1
• Machine CE plate:
• Machine ETL plate:
• Machine KC plate:
GB-5 X
3AV HC
GN000000
02/19
220-240
7783
33,8
50-60
0.9
1.3x3
11
GB5 X 3AV
161
GN000000
09/19
29-33
GB-5 S
3AV
GN000000
04/20
28.3
6230
11
5
0.9
220
