English
Firenze - Italia
Description
Display
Operating Procedure
34
La Marzocco, S.r.l. Firenze, Italia
Version 1.3
Tea Water
Technician Level Parameters
•
This parameter allows the technician to select the
activation of the water pump during hot water
dispensing.
•
When hot water is drawn from only the steam boiler
this parameter should be set to “without pump”
•
If the optional adjustable temperature hot water
dispense valve is installed, this parameter is set to
“with pump”.
Password
?????
LaMarzocco 09:30
Language
English
Tea water
without pump
Press and hold the
button on the group 1 keypad until the following is displayed
(approximately 10 seconds):
Enter the 5 digit technician password using buttons 1-5 on the group 1 keypad. Once accepted the
following appears:
1
2
Press the
button on the group 1 keypad until the following appears (about eight times):
3
MODE
When finished, continue to the next parameter or press
to exit programming mode.
5
ON
OFF
4
Tea water
without pump
Press the
or the
button to change to “with pump” or “without pump”. Once the desired
condition is displayed press the
button to confirm.
+
MODE
Software Programming Manual - ENG - V 1.3.pmd
30/10/2006, 14.39
34