English
Firenze - Italia
Description
Display
Operating Procedure
32
La Marzocco, S.r.l. Firenze, Italia
Version 1.3
Filter Alarm
Technician Level Parameters
•
This parameter allows the technician to preprogram
an alarm that notifies the user when the water filter
requires service or replacement.
•
When the programmed volume of water has passed
through the espresso machine the error message
“Change Filter” is displayed.
•
A value of 0 (zero) disables the filter alarm
parameter.
Password
?????
LaMarzocco 09:30
Language
English
Filter
Alarm
Press and hold the
button on the group 1 keypad until the following is displayed
(approximately 10 seconds):
Enter the 5 digit technician password using buttons 1-5 on the group 1 keypad. Once accepted the
following appears:
1
2
Press the
button on the group 1 keypad until the following appears (about six times):
3
MODE
7
5
Filter
Alarm
Press the
or the
button to change the volume of water required before filter servicing/
replacing is recommended. When finished press
to confirm.
+
ENTER
Change H2O Filt.
0 liters
Water Flow
12 cc/sec
Press the
button on the group 1 keypad until the following appears (about six times):
4
ENTER
6
Press the
or the
button to change the estimated flow rate of water. Normally this value
should not be changed. When the desired value is displayed press
to confirm.
+
ENTER
ON
OFF
When finished, continue to the next parameter or press
to exit programming mode.
Note: To reset the function turn off the machine with
the button (press and hold approximately
3 seconds). Next, press and hold the
button while turning on using
the button.
ON
OFF
MODE
ON
OFF
Software Programming Manual - ENG - V 1.3.pmd
30/10/2006, 14.39
32