24
Table 6. Various displays in Refresh Mode
Stage in Refresh
mode
Various displays (toggled by pressing DISPLAY key)
Voltage (V)
Current (mA)
*Time (hh:mm)
Capacity
(mAh/ Ah)
During
discharging
processes
Instantaneous
Battery voltage
Discharging
current
Discharging time
elapsed
Capacity during
discharging
During charging
processes
Instantaneous
Battery voltage
Charging current
Charging time
elapsed
Capacity
determined in last
time discharging
Full stage
Instantaneous
Battery voltage
Trickle charging
current
Elapsed time of
last discharging
Maximum battery
capacity
determined in
discharging
25
Table 7. Various displays in Test Mode
Stage in Test
mode
Various displays (toggled by pressing DISPLAY key)
Voltage (V)
Current (mA)
*Time (hh:mm)
Capacity
(mAh/ Ah)
During charging
Instantaneous
Battery voltage
Charging current
Charging time
elapsed
“--- mAh”
During
discharging
Discharging
current
Discharging time
elapsed
“--- mAh”
During 2nd
charging
Charging current
2nd charging time
elapsed
Capacity of the
battery
determined in
discharging
Full stage
Trickle charging
current
Discharging time
elapsed
Capacity of the
battery
determined in
discharging
26
NOTE
:
z
*The timer will be resumed and counted from 00:00 again after the time elapsed is longer
than 20 hours. (For example, 1:45 will be shown after the battery has been refreshed for
21 hr and 45 min.)
z
In case the power source is interrupted or terminated when the charger is being operated,
the operational mode will automatically be set to “Charge mode at 200 mA” to charge up
the battery once the power source is back to normal, regardless the operating mode
(Charge, Discharge, Refresh or Test) which has been selected by user before.
CARE AND MAINTENANCE:
z
Extreme temperatures, vibration and shock should be avoided as these may cause
damage to the unit
z
Place charger on a hard flat surface.
z
When cleaning the displays and casings, use a soft damp cloth only. Do not wet the
exposed metal part of the charging unit. Do not use solvents or scouring agents as they
may mark the LCD and casing.
z
Do not spill water to the charging unit.
z
Do not make any repair attempts to the units. Return it to its original point of purchase for
27
repair by a qualified engineer. Opening and tampering with the units may invalidate its
guarantee.
z
Do not expose the unit to extreme and sudden temperature changes, this may lead to
damage to the electronic parts in the unit.
SPECIFICATIONS:
Input voltage for AC/DC adapter
:
100-240 VAC but MUST have the proper
adapter. Twisting prongs on a/c cord will only
damage the unit.
Charging current range
:
200 mA - 700 mA
Max charging capacity
(capacity of rechargeable batteries)
:
3000 mAh
Dimensions (H x W x D)
:
Charging unit:
2.95” x 5.11” x 1.57”
(75 x 130 x 40 mm)
28
LIABILITY DISCLAIMER:
z
The manufacturer and supplier cannot accept any responsibility for any improper or
incorrect use and any consequences occur.
z
Any performance of repairs or alternations by someone other than the original supplier
will invalidate the warranty.
z
This product is designed to be used only by people who have read and understood this
instruction manual.
z
The specifications of this product may change without prior notice.
z
This product is not a toy. Keep out of the reach of children.
z
No part of this manual may be reproduced without written consent of the manufacturer.
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against
manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on products
purchased and used in North America and only to the original purchaser of this product. To
receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem
29
determination and service procedures. Warranty service can only be performed by a La Crosse
Technology, Ltd authorized service center. The original dated bill of sale must be presented
upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s
authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as
stipulated herein, with new or reconditioned parts or products if found to be defective during the
limited warranty period specified above. All replaced parts and products become the property of
La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement
parts and products assume the remaining original warranty, or ninety (90) days, whichever is
longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs
covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is
examined which is not in need or repair, you will be charged for the repairs or examination. The
owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd
product to a La Crosse Technology, Ltd authorized service center. La Crosse Technology, Ltd
will pay ground return shipping charges to the owner of the product to a USA address only.
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with
the following specified exceptions: (1) damage caused by accident, unreasonable use or
