64
Installation Guide - "Château" Range G4
08NOTINSTALG4/EN-1
The oven dishes
IGNITION – ADJUSTMENTS
To use your oven in complete safety you must
set up the large tray or "drip pan"
correctly.
To position the large tray or drip pan at the required height, place it above the lateral oven
sliders, with the tray slots above the slider stops. Then push the tray to the very back of
the oven until the stops are re-inserted into the slots. Pull the large tray forward until the
back of the tray is blocked by the stops of the lateral oven sliders.
Taking away the "shelf" tray
Push the shelf tray which is on the sliders to the
back of the oven; lift the back of the tray so the stops
are positioned above the sliders, then pull the tray
towards you.
The light is located on the side at the top of the oven; it is automatically switched on when
the oven door is opened.
Please note: disconnect your oven before interfering with the light to prevent
any risk of an electrical shock and to allow the appliance to cool down (if
necessary).
Remove the protection glass and then unscrew the damaged light.
Refit a new light and the protection glass.
Technical characteristics of the light:
- 25 W
- 230 - 240 V
- 300°C
- E14 base
All the adjustments and replacement of injectors or bypass screws must be
carried out by a qualified professional.
The part numbers of the injectors for the various burners and the gas oven (see their
locations on the photographs below) differ depending on the type of gas used and the
country of installation.
3. R
EPLACING THE OVEN LIGHT
4. C
HANGING THE INJECTORS
Drip pan
Stops
Stops
Slots
Oven sliders
Large tray and "drip pan" correctly installed on the oven
sliders.
