60
Installation Guide - "Château" Range G4
08NOTINSTALG4/EN-1
Starting with the ovens
IGNITION – ADJUSTMENTS
Note:
The red indicator in the bottom part of the control box indicates any operational defects
related to oven ignition. If this indicator is ON, check that the gas shutoff valve is set to the
open position and the cooker is well supplied with gas, then press the button (G) to the
left of the indicator light.
Before using the oven for the first time or if it has not been used for a long period of time,
you have to press this button several times to defuse any trapped air from the gas circuit.
If this phenomenon persists, contact our after-sales department or your dealer.
RCC disc: Radiation, Convection, Conduction
Your oven is fitted with an RCC enameled cast iron disc which
transmits the heat from the gas burner to the oven by Radiation,
Convection or Conduction. Thanks to this heat distribution and
transmission system your oven is perfectly adapted to all types of
cooking, including simmering.
Before using your gas oven, install the burner and RCC disc,
making sure that the studs are correctly positioned in the
corresponding holes.
N.B.: If you want to remove the RCC disc after cooking (e.g. for cleaning), allow
it to cool down completely.
Ignition of the gas oven:
To operate your oven, first press button (A), which switches on the
oven. The light in the oven comes on if the oven door is open. The light
goes out automatically when the door is closed.
The simmerstat (C) switches on the heating element on the vault of the
oven (grill), and the thermostat (B) switches on the gas burner.
The simmerstat and the thermostat are coupled to ON indicator lights
(E and D). As soon as you turn the thermostat or simmerstat the
corresponding indicator light comes on.
To ignite the gas burner turn the oven thermostat (B) to the desired
temperature. In addition to indicator light (D), the burner ON light (F)
also comes on.
The burner ON light (F) remains lit if the gas burner is operating and
goes out if the burner stops.
The oven ignition takes places automatically as follows:
- the ignition electronics are switched on (by the thermostat),
- starting of sparkling igniter (sparks are emitted),
- opening the gas electrovalve,
- ignition of burner,
- regulation by the thermostat and the electronics.
If the burner does not ignite, you should wait at least a minute before making
another attempt to ignite the burner
The ignition by a match is prohibited.
C
B
G
A
D
F
E
