English
38 EN
Softener
This message is displayed when the softener
resins need to be regenerated. (Follow the
instructions on softener maintenance).
Once regeneration has been completed, press the
icon
to access the programming menu:
REGENERATE RESIN
$
and press the icon
to cancel out the
message:
$
Note: the
need to
regenerate the resins is recorded
by the machine
.
Change water
¿
lter
This message is displayed when the machine
req
uires the substitution of the water
¿
lter.
In order to eliminate temporary the message, press
the icon
to access the programming menu:
CHANGE W. FILTER
$
and press the icon
to cancel out the
message:
$
The message will appear again at regular intervals.
Contact an authorised technician. The message
wi
ll be displayed until the
¿
lter has been replaced.
Note: the
need to
to replace the
¿
lter is recorded
by the machine.
Machine in
stand-by
This message is displayed when the machine
switch ON/OFF has been programmed. The
message indicates that the machine is switch-off
and is in stand-by status.
Refer to the "Service time menu" chapter to see
how to program the switch ON/OFF of the machine.
Push any dispensing button to turn it on.
Energy saving
mode
This message is displayed when the machine is
in ECONOMY mode.
Press any dispensing button to exit the ECONOMY
mode and return to the machine work phase.
Messages
about
washings
Please consult this manual at the "Cleaning and
maintenance".
Содержание M100 Attiva GTA
Страница 4: ...M100 1 6 11 8 9a 9 20 13 19 19 19 15 23 Cold Touch Turbomilk 9c Tsn 12 35 Tsb 9b II ...
Страница 87: ......