La Boite Concept PR LINK, Руководство пользователя

Страница: 18 / 39

34 35
The equipments recommended by La Boite concept complies with FCC exposure guidelines and
are approved as part of an uncontrolled environment. These equipments have been designed so
that are installed and used from a minimum distance of 20 cm between the transmitter equipment
and the user(s).
FCC CAUTION
Any changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
AERATION / IMPORTANT
The unit may heat when used. Never operate the central part without its side bases. Do not
place the equipment in a completely closed room or in a compartment insufficiently ventilated.
Make sure that no small object can pass through the PR LINK. If it happens, immediately switch
off the device, disconnect it from the wall power socket and contact your dealer for assistance
and advice.
LOCATION
Carefully select a spot for installing your equipment. Avoid placing it directly in sunlight or
nearby a heat source. No fire source such as candles shall be placed on the device. Also, avoid
any source which could cause vibration, dust, coolness or moisture. The device can be used at
average temperatures. The unit must be installed on the two (2) PR LINK provided legs.
Do not operate the central part without its sides bases. Do not install the equipment in a completely
closed room or in a set of compartments. Do not place the unit on an unstable surface or on a
shelf. Make sure that the furniture inserts have been correctly fastened. If not, the unit could fall
and injury a child or an adult, and damage the product as well. Due to the disturbed magnetic
fields, no record player or CRT television set must be placed nearby the device to avoid possible
interference.
POWER SOURCE
The unit should only be used with the type of electric power source compatible indicated in the
trapdoor storage space. If you are not sure about the power source rating in your place, please
contact your dealer or the company responsible for the electric power installation in your area.
The unit was designed to be left in Stand-by mode when not in use ; this wall allow increasing
the amplifier’s life (this is true for all electrical devices). To switch off the unit, press the ON/OFF
button on the rear of the device (metal plate located under the central unit). If you do not intend
to use the unit for a long period, simply unplug it from the wall power socket.
OVERLOAD
Avoid overloading the wall-mounted electrical installations or the extension cords because this
could cause a fire or an electrical discharge. Overloaded DC installations, extension cords,
damaged power cables, a damaged or cracked insulation and broken plugs are dangerous.
They could cause a discharge or a fire. Make sure that each cables are correctly inserted.
To avoid humming or background noise, do not mix interconnections with the power cord or
loudspeakers cables.
CLEANING
In order to clean the unit, wipe it with a dry, lint-free cloth. Do not use liquid cleaning products
containing alcohol, ammonia or abrasives. Do not use a spray on and nearby the unit.
REPAIRS
These units should not be repaired by the user. Do not try to repair, dismount or un-assemble
the unit if a problem occurs. A strong electric discharge could take place if this precautionary
measures are not respected. In case of a problem or failure, please contact your dealer.