La Boite Concept PR LINK, Руководство пользователя

Страница: 17 / 39

32 33
DANGEROUS VOLTAGE
The luminous indicator with the “arch
in an equilateral triangle” symbol
is intended to warn the user of the
presence of a “dangerous current”
not insulated in the product, and
this current could be strong enough
to cause an electric discharge on
people.
ATTENTION
The purpose of the exclamation
point in equilateral triangle is to
inform the user of the presence of
important instructions in this manual
about how to operate the device and
maintenance operations.
!
DEEE SYMBOL
The separate recycling of electrical and
electronic devices. This product contains
electrical and electronic equipments
which can be reused, recycled or
recovered, and therefore must not be
discarded in your usual trash, which is
not selectively sorted. Please return the
unit or contact the authorized dealer
who supplied you the product for more
information.
CE MARK
This product in conformed to the
European directives related to low voltage
(2006/95/EC) and electromagnetic
compatibility (89/336/EEC) when the
unit is installed and used accordingly
to the users manual instructions. To
guarantee extended conformity, only La
Boite Concept accessories should be used
with this product and the maintenance
operations must be conferred to qualified
and specialized personnel.
NORMES FCC
The PR LINK speaker in an acoustic
speaker which integrates a power
amplifier.
WARNINGS
To reduce the risk of fire or electrical discharge, do not expose the unit to
rain or wet sources. The unit is class 1 classified, and it must be connected to the electrical wall
power socket with an earth plug. The unit must be installed so that it can be removed from the
electrical network by means of the earth plug (or with an adapted connector located on the rear
side of the unit). If the power plug is used as a disconnection device, the unit must be available
and easy to use. Only use the power cords supplied with the unit. We recommend not to place
in a confined space. Do not place the unit on a rug, or on a smooth surface, and do not obstruct
the air holes, the amplifier’s radiator (blades), or the output screens.
The unit must not be used nearby water ; it must not be exposed to an evacuation source, or to
splashing, or to any other types of liquids. No object filled with water such as vases, should be
placed on the unit.
WARNING DISCLAIMER
The PR LINK set up is a very important step for the correct
use of the product. The end user should carefully read the assembly guidelines before setting up
the product or consult a brand representative in case of any question. CCLAB La Boite concept
and its distributors cannot be held responsible in case of the product falling due to a mounting
that did not follow these guidelines.
IMPORTANT : THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITIES FOR RADIO OR
AUDIOVISUAL INTERFERENCES GENERATED BY UNAUTHORISED CHANGES MADE ON THIS
DEVICE.
SUCH CHANGES COULD WOULD VOID THE MANUFACTURER WARRANT AND CANCEL THE
AUTHORIZATION OF UTILIZATION BY THE USER.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
This equipment was created and tested in conformity with the limits of class B digital devices in
accordance to FCC rules. These limits were defined to provide a reasonable protection against
dangerous interferences inside a residential installation. The equipment generates, uses and may
emits radio frequency radiation if it is not installed or used in conformity with the instructions, and
this may cause dangerous interference for radio communications.
However, it is impossible to guarantee that no interferences will appear in a specific installation.
If this device generates interferences which disturbs the reception of radio or television emissions,
which may be noted by activating or deactivating the device, we propose to the user to try to
remedy such interferences in one of the following ways :
/ Reorient or move the reception antenna ;
/ Increase the distance between the equipment and the radio television set ;
/ Connect the device to a wall power socket of another circuit than that one used for
the radio or the TV ;
/ Contact the dealer or an experienced TV/radio technician for assistance.