L3Harris HP-01, Руководство пользователя

Страница: 7 / 66

EC Conformity VII
SAFETY RECOMMENDATIONS AND INSTRUCTIONS
This product has been designed, produced and tested in Italy, and it left the factory in conditions fully
complying with the current safety standards. To maintain it in safe conditions and ensure correct use,
these general instructions must be fully understood and applied before the product is used.
•
In case of devices permanently connected to the power supply, and lacking any fuses or other
devices of mains protection, the power line must be equipped with adequate protection
commensurate to the consumption of all the devices connected to it;
•
Devices in Safety Class I, equipped with connection to the power mains by means of cord and plug,
can only be plugged into a socket equipped with a ground wire;
•
Any interruption or loosening of the ground wire or of a connecting power cable, inside or outside the
device, will cause a potential risk for the safety of the personnel;
•
Ground connections must not be interrupted;
•
To prevent the possible danger of electrocution, do not remove any covers, panels or guards installed
on the device, and refer only to NARDA Service Centers if maintenance should be necessary;
•
To maintain adequate protection from fire hazards, replace fuses only with others of the same type
and rating;
•
Follow the safety regulations and any additional instructions in this manual to prevent accidents and
damages.
DANGER BY HIGH FORCES IN STATIC FIELDS
Danger: high static magnetic fields – as found, for example, around an MRI or NMR spectroscopy
magnet – will subject the USB connector or other ferromagnetic parts to strong forces.
To prevent injury from flying objects or whiplashing cables, be sure to hold these components securely
when you are around a strong magnet.