L3Harris HP-01, Руководство пользователя

Страница: 52 / 66

9-2 Communication protocol
9.3 LEDs behaviour DATA LED
Right after HP-01 switched on, DATA LED remains RED for 500ms.
Then it starts blinking. The on and off periods depend on:
- Sensor range: The time DATA LED is on is longer when HP-01 is in high
range mode than when HP-01 is in low range mode.
- Span: The time DATA LED is off is longer with narrower spans (higher
span id) than with broader spans (lower span id).
DATA LED changes to green (still blinking with the same periods as
described above) as soon as HP-01 receives a recognised command.
The green colour lasts for 2s; then DATA LED changes back to red.
DATA LED blinks green (same periods as described above) when HP-01
successfully communicates with 8053B.
The green colour lasts for 2s since last successful communication; then
DATA LED switches to red.
DATA LED is off when HP-01 is being charged.
Power-on LED
Power-on LED blinks (roughly with 0.5s-period) only when HP-01 is
powered.
When HP-01 is still on charge Power-on LED is orange; whereas when HP-
01 has finished charging (still powered), Power-on LED is green.
Power-on LED blinks red when the User tries to switch off HP-01 when
powered (not allowed action).
Power-on LED blinks red when HP-01 is going to switch off after a period of
inactivity (10 minutes).
Auto-switch-off blinking starts in the last 30 seconds of activity and it
becomes faster in the very last 5 seconds.
Power-on LED is orange during the sensor zeroing process.
On switch on, Power-on LED is normally orange (PC mode).
On 8053B-mode switch-on (button pressed twice), Power-on LED is green.
Power-on LED is green during the whole pairing process with 8053B, until a
successful communication with 8053B is established.
Then Power-on LED turns off.