L3 Aviation Products Lynx NGT-9000, Руководство пилота

Страница: 47 / 96

Lynx
®
NGT-9000
Pilot’s Guide 2-21
Operation
Options - Settings
The Settings screen provides the following information and functionality:
See Figure 2-11.
Radio buttons to set the traffic altitude mode (Normal, Above, and
Unrestricted). This selects the default altitude mode used when
the aircraft goes in-air. This is also used as the altitude mode
when on the ground and the “TFC” button has selected “AIR” or
“ALL”.
Display Brightness Trim button is used to open a slide bar to adjust
the screen brightness up or down from the automatic brightness
control setting. This is trim adjustment not a 0 to 100% control.
The VFR Code button is a means to update the default VFR
code to use when the “Squawk VFR” button is pressed on the
transponder application screen. Tap the button to go to a VFR
Code edit screen to set a new VFR code. NOTE: This should be
set to 1200 for use in the USA.
A Flight ID toggle button is shown if configured. Tap the button to
open the Flight ID Edit screen.
•
•
•
•
Figure 2-11: Traffic Options Screen - Settings
Status Settings Done
Initial Traffic Altitude Mode:
Normal Above Unrestricted
BRT
VFR Code
1200
FLT ID
AAA 1234
Selected Traffic Info Button (i)
The selected traffic info button appears on the left side of both the left
and right screen after a traffic symbol is pressed. When the button is
tapped a traffic information window is shown over the top of the traffic
screen.