![background image](http://html1.mh-extra.com/html/l-b-white/cr035/cr035_owners-manual-and-instructions_3146488015.webp)
14
■
This procedure is to be done once a year prior to the
heating season, anytime the heater is moved from one
job location to the next, or after servicing the heater.
MATERIALS REQUIRED
(To be secured through local purchase)
Quantity
Description
1
Low pressure gauge kit, part number
00764
A. PREPARATION
1.
Close the fuel supply valve.
2.
Allow heater to burn off gas remaining in it’s gas hose.
3.
Allow the heater to cool.
B. GAUGE INSTALLATION
1.
Using a 3/16 in allen wrench, remove the allen plug
located on the gas manifold as shown in Fig. 12.
FIG. 12
2.
Install the gauge at this point. See Fig.13.
FIG. 13
3.
Open fuel supply valves to heater.
C. READING PRESSURES
1.
Light the heater. With the heater operating, the
pressure gauge should read the pressure specified on
the dataplate or in the specification section of this
owner’s manual.
2.
Does the pressure reading agree with that given on
the dataplate? If so, no further checking or adjustment
is required. Proceed to section D.
3.
If the pressures does not agree with that specified on
the dataplate, then check the following:
-- Improper regulator for heater.
-- Regulator out of adjustment.
(Replace if necessary).
-- Blockage in gas hose.
-- Insufficient size or quantity of propane gas supply
containers.
D. COMPLETION
1.
Once the proper pressure has been confirmed, close
fuel supply valves.
2.
Allow heater to burn off fuel remaining in gas supply
line, and allow the heater to cool.
3.
Remove the gauge.
4.
Install allen plug into manifold, tightening securely.
5.
Check for gas leaks.
WARNING
■
Do not disassemble the safety control valve.
■
Do not attempt to replace any components of the
safety control valve.
■
The safety control must be replaced if any physical
damage occurs to it.
■
Failure to follow this warning will result in fire or
explosions, leading to injury or death, and building
damage.
GAS PRESSURE CHECKS
3/16 IN. ALLEN PLUG
Содержание CR035
Страница 2: ......
Страница 18: ...17 Parts Identification Parts Schematic...
Страница 38: ...Identification des pi ces composantes SCHEMA DES PIECES COMPOSANTES 18...