L-Acoustics LA4, Руководство пользователя

Страница: 26 / 96

LA4
AMPLIFIED CONTROLLER
User Manual
VERSION 1.1
LA4_UM_ML_1.1
w w w . l - a c o u s t i c s . c o m
24 en
7.3 User interface menu
7.3.1 Introduction
The user interface gives access to 6 menus that are briefly described in the following list. Please refer to sections 7.3.2
to 7.3.7 for detailed instructions.
Menu Fonction
LOAD PRESET Load and initiate a preset (memory 1 to 99)
STORE PRESET Save user preset & parameters in memory 1 to 10
DELETE PRESET Erase a preset stored in memory 1 to 10
PRESET PARAMETER Control and set Mute/Unmute, Gain, delay, and polarity (when available)
CLEAR GRP PARAMETER Remove group parameters defined in the LA NETWORK MANAGER Software
(Name, Gain, Delay, and Contour EQ).
OPTIONS Set the network address number of the LA4 within a network, the input signal
source (analog or digital), the delay unit, and the contrast of the LCD screen.
Gives in real-time the temperature and RMS output voltage of each amp channel.
Display data like MAC ADDRESS, firmware and onboard preset library version.
To access one of these menu follow this procedure (see Figure 15):
1. Press and release the encoder wheel.
2. Rotate the encoder wheel to the left or to the right until desired menu is selected.
3. Press the OK tab or the encoder wheel to enter menu or press the ESC tab to go back to the Main screen.
Figure 15: Menu selection procedure