SKY899
Installation Manual
009-11900-001
General Information - Page 1-23
Revision F
July 18, 2013
Switches (continued)
WX-1000
If the final configuration includes a WX-1000
Stormscope
Weather Mapping
System, two external switches are required. Any general purpose toggle switch
(1/2 A @ 28 V dc) may be used for SW1 & SW2 switches.
SW1 - A SPST switch is required for the SKYWATCH
/Stormscope
display
mode switch.
SW2 - A DPDT switch is required for the WX-1000 maintenance switch.
WX-1000/SKY497 Display &
WX-1000 Processor Cable
This cable is used to connect the WX-1000/SKY497 display and/or WX-1000
processor to the TRC. Required connectors and contact pins are supplied in the
installation kit. Cable specifications and U.S. vendors are listed below in
Table 1-12.
NOTE
Use of any cable not meeting specifications voids all system warranties.
Table 1-12: Display Cable Vendors
U.S.
COMPANY
DISPLAY CABLE
P/N
WEIGHT
(LB PER 100 FT)
Dallas Avionics
1-800-527-2581
214-320-9776
FAX 214-320-1057
WX-3
10.5
Electronic Cable Specialists
1-800-327-9473
414-421-5300
FAX 414-421-5301
3N6715
16
A.E. Petsche
817-461-9473
FAX 817 277 2887
TZDIS
13.1
PIC Wire and Cable
1-800-742-3191
262-246-0500
FAX 262-246-0450
WM25815
14.5
EDMO Distributors
1-800-235-3300
509-535-8280
FAX 1-800-828-0623
FAX 509-535-8266
WX-1000 Display
---
1.8 INSTALLATION APPROVAL
The SKY899 must be treated as a major alteration on F.A.A. form 337 referencing STC Number
ST01552CH-D, if not installed under a type certificate or supplemental type certificate. Refer to FSAW
98-04B bulletin for follow-on field approvals of Traffic Alert/Advisory Systems and Traffic Alert and
Collision Avoidance Systems (TCAS I)
Aircraft mandated for TCAS I under the provisions of 14 CFR part 135, must be installed under a type
certificate or supplemental type certificate.
The document reference is online, please check the correspondence between the online documentation and the printed version.