Kystar KS910P, Руководство по эксплуатации

Страница: 26 / 29

Multi-Image Splicing Processor
22
A: Output resolution is pixel mode output by single port of splicer and the largest control
range of splicer output. Regular resolutions are: 1024*768, 1280*1024, 1600*1200 and
1920*1080, which are set with the same resolution mode of transmitting card.
Q4: What is administrator password set in PC Software?
A: No password. Just a click is ok.
Q5: What are the reasons for failure of serial connection with the application of serial
splicing processor?
A: Possible reasons are as follows:
①
Wrong selection of COM port. Just click “Confirm” and re-click “opening serial port” key.
②
Occupation of serial port. Two or more software windows are not allowed to be open
simultaneously.
③
Failure of serial port line connection or damage of the line.
④
Damage of COM drive of the board or serial port.
If suggestions above fail to solve your problems at last, please contact our customer service
in time. We will help you to solve your problems as soon as possible.
Q6: What are the possible reasons for network overtime with network splicing processor?
A: Possible reasons are as follows:
①
IP address of local connection is not in the same field with splicer.
③
Failure of network line connection or damage of the line.
③
Damage of network port of signal source.
If suggestions above fail to solve your problems at last, please contact our customer service
in time. We will help you to solve your problems as soon as possible.