Kystar KS910P, Руководство по эксплуатации

Страница: 18 / 29

Multi-Image Splicing Processor
14
WIN
Image Switch
Image 2
S1
Image 3
S1
Image 1
S1
Note: The full screen size is 1792x1344 and image proportion is required as 1:2:1, so the sizes
of the three images are respectively 448, 896 and 448. As the left images starts from the far left,
its horizontal position is 0. The middle image follows the left image, so its horizontal position is
448. The right image follows the middle, so its horizontal position is 448+896=1344. The vertical
direction always starts from the top, so the vertical position is 0. In summary, both horizontal and
vertical positions of image 1 are 0 and horizontal and vertical sizes are 448 and 1344 respectively;
Horizontal and vertical positions of image 2 are respectively 448 and 0 and horizontal and vertical
sizes are 896 and 1344 respectively. Horizontal and vertical positions of image 3 are respectively
1344 and 0 and horizontal and vertical sizes are 448 and 1344 respectively.
Step 7: According to operation above, screen body has been divided into three images with
proportion of 1:2:1. Default display content of each image is S1. If different signal sources should
be designated for each image, click of front panel to enter into image switch interface. Select
image by rotate knob and choose signal by click of S1-S6 of front panel. E.g.: if signal of image 2
is S6, click “WIN” to enter into image switch, then adjust rotate knob to image 2 (it’s selected if
padded) and finally click “S6” of front panel. After selecting each image, save final data which is
the same with step 4.
Up to now, program debugging is finished. If any display method is needed in later stage, it’s
just OK to call saved mode. There are two ways for mode call. When mode number is not big, just
click M1-M6 of front panel which are shortcut key for mode call; when mode number is big (over
6), user mode call should be made. Click “MENU” to enter into main menu interface, then select