Kystar KS910P, Руководство по эксплуатации

Страница: 16 / 29

Multi-Image Splicing Processor
12
Screen Parameters
OUT1
OUT2
Select by finger key
Vertical Size:
1080
Confir Cancel
×1 ×10
×100
Horizontal Size:
1920
Turn knob to select
output
Save Setting
Save Mode 1
Device Mode
Image Layout
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Current mode does not
exist!
Step 2: Click “OK” to return to main menu interface; select “Large screen parameters” to set
size of each output interface.
Note: Input according to corresponding transmitting card size of each output interface. For
OUT1, its horizontal size is 1792 and vertical size 704; for OUT2, they are 1792 and 640
respectively.
Step 3: After inputting, select “Confirm” and return to main menu interface. The large screen
splicing is finished, select signal source needed to display on screen and click corresponding key.
E.g.: for display of computer signal on large screen and connection of computer DVI interface
with “S1-DVI” port of the back device, just click “S1” in the front which means choosing the
signal to display on the screen.
Step 4: After selecting signal and normal display of large screen, save all setting data. Click
“MENU” to enter into main menu interface, and then get into “Save setting” interface to select
“Mode 1” and click “OK”. Things will be fine when it suggests saving successfully.