KYOWA WGA-670B, Инструкция по эксплуатации

Страница: 36 / 60

31
Output Connection Diagra m
COM
Max 30V
External Internal
←
Max 20mA
Output Connection Diagra m
COM
Max 30V
External Internal
←
Max 20mA
Switch or
Open Collector
Input Connection Diagra m
Exte rnal Internal
12V
1 〜 5mA →
Switch or
Open Collector
Input Connection Diagra m
Exte rnal Internal
12V
1 〜 5mA →
6-3 SETTING BCD OUTPUT
The number of output times, data logic, and EOC logic are set with the function selecting mode ‘F-11.’
Since the hold input and output prohibit input are set to negative logic, no change is allowed.
‘F-11’ indication: (1) Output times – (2) Data logic – (3) EOC logic
(1) Setting the Number of Output Times
The first numeric value (1) indicated with the function selecting mode ‘F-11’ describes the following number
of output times. Select the desired item with arrow keys. See “4-1 OPERATION & FUNCTION.”
0: 125 times/sec
1: 62.5 times/sec
2: 31.3 times/sec
3: 15.6 times/sec
(2) Setting Data Logic
The center value (2) indicated with the function selecting mode ‘F-11’ describes the following BCD output
logic. Select either of the two with the arrow keys.
In addition, when the signal is enabled and when the transistor is ON, it is considered as negative logic.
0: Negative logic
1: Positive logic
(3) Setting EOC Logic
The last numeric (3) indicated with the function selecting mode ‘F-11’ describes the following EOC logic.
Select either of the two with the arrow keys.
0: Negative logic
1: Positive logic
6-4 CONNECTING BCD OUTPUT
For connecting to external devices, separately prepare the following connector.
For connection, see “6-2 PIN NOS & SIGNAL NAMES” and the following figures.
(One example of the connection)
Connector in use: 57-30360 (DDK Ltd. equivalent)