Kyowa Medex Co., Ltd. HM-JACK Series Скачать руководство пользователя страница 47

Страница: 47 / 91

HM-JACKarc Operation Manual

Analysis Operations

5 - 2 Rev.4

5.2 Preparations for Starting Analysis

5.2.1 Turning on the Analyzer

There are two different ways to turn on the Analyzer.



Turning on manually



Before turning the power on, check that the power plug is

correctly inserted into the socket.



If the power plug is not connected correctly and securely, there

is the risk of overheating leading to fire and or electric shock.

It takes approximately one hour for the instrument to warm up and to be

ready for analysis after power is turned on. Turn it on in advance of

starting analysis.

Switch on the POWER on the left side of the Main Unit. The Start Up

screen will be displayed and touch anywhere of screen to go to Main

Menu.



Power switch (On)



Turning on automatically (from Sleep Mode)

When Sleep Mode is set after previous operation, the Analyzer starts up

automatically and the Start Up screen is displayed. Touch anywhere of

screen to return to Main Menu.

Warning

Содержание HM-JACK Series




























































































Результаты поиска

Содержание HM-JACK Series

Отзывы:

Похожие инструкции для HM-JACK Series

Бренды по названию

Популярные бренды

Kyowa Medex Co., Ltd. HM-JACK Series, Руководство по эксплуатации

Результаты поиска

Содержание HM-JACK Series

Отзывы:

Похожие инструкции для HM-JACK Series

Бренды по названию

Популярные бренды