Kyoeisha Baroness LM282 Скачать руководство пользователя страница 20

Страница: 20 / 70

- 18 -

Do not drive on public roads

Caution

11-7

•

This machine is not approved for use on public roads and so public road should be

avoided.

12. Long-term storage

•

Please refer to the engine operation manual.

•

Clean the unit thoroughly and add grease and oil.

•

Remove the battery, and then charge it before storing in a well ventilated room. (For

details, see the battery manual)

•

Fill the tires to slightly more than the standard air pressure, and park the vehicle on top of

wooden planks to protect it from moisture.

•

Check for loose or missing bolts and nuts. Tighten or replace those found to be loose or

missing.

•

Repair any broken parts, and paint any areas where the paint is chipped.

•

Store the unit in a dry location, out of the rain.

Содержание Baroness LM282







































































Результаты поиска

Содержание Baroness LM282

Отзывы:

Похожие инструкции для Baroness LM282

Бренды по названию

Популярные бренды

Kyoeisha Baroness LM282, Руководство по эксплуатации для владельца

Результаты поиска

Содержание Baroness LM282

Отзывы:

Похожие инструкции для Baroness LM282

Бренды по названию

Популярные бренды