background image

- 7 -

• Before operating the machine, check that all covers, safety devices, and labels are

correctly in place and that all parts are in good working condition. Take particular care in

checking the brakes, tires, steering, and mower units for abnormalities.

• Maintain a speed at which an emergency stop could be safely performed in any

circumstances.

• To prevent injury to the lawnmower operator or anyone else in the area, clear the area to

be mown of any obstacles.

Machine operation

Caution

3-1

3. Machine Operation

Before start-up

1) Pull up the side brake lever.

2) Put the reel raise/lower lever and the reel

rotation lever in their neutral positions.

3) Put the throttle lever in the middle position.

For safety, make sure that there are no obstacles around the

mower or people nearby. 

Make sure that the seat switch, the safety switch, and the various

covers are correctly positioned and undamaged.

Do not start up the mower inside a building that does not have

adequate ventilation.

• 

Never start the engine with your foot on the accelerator pedal. It is

extremely dangerous to do so as the mower will begin moving.

• 

Do not touch the fan belt, pulleys or other rotating parts while the

engine is running.

Caution

Before starting the engine

3-2

Throttle lever

Side brake lever

Reel raise/lower lever

Reel rotation lever

Handle

Accelerator 
pedal

Starting up the engine

1) Sit in the seat.

2) Pull the throttle lever to slightly beyond the

LOW position.

3) When the key is turned to the right to the

ON

position, the thermostat light comes on,

and the combustion chamber of the diesel

engine is heated.

4) Once the thermostat lamp has gone off,

quickly turn the key to the right. This

engages the starter, starting the engine. At

this point, the key may be released.

5) Check that the charge lamp and the engine

oil pressure lamp go out. In the unlikely

event that the lamps do not go out, stop the

engine and then conduct an inspection and

service.

Starting up and shutting off the engine

3-3

Charge

Thermostat lamp

Key

Engine oil pressure

Thermostat

OFF

ON

ST

(returns automatically)

Shutting off the engine

1)

Turn the key to the left to the 

OFF

position to shut off the engine.

: Make sure that you are sitting in the driver's seat when you start the

engine. If your mower is equipped with a seatbelt, make sure that

you fasten it.

Caution

This mower is equipped with a safety device that ensures the safe start-up and operation of
the mower.
• When starting the engine, the following three conditions must be met.

a. You must be seated in the seat.
b. The parking brake must be engaged.
c. The reel rotation switch must be in neutral.

• Unless the parking brake is engaged, the engine will stop if you leave the seat when the

engine is running.

Safety device

3-4

:

Warning

Содержание Baroness LM282







































































Отзывы: