Kyocera TASKalfa 265ci, Руководство по эксплуатации

Страница: 244 / 355

9-22
Setup, Registration, and User Management > System Menu
IPSec
Secure Protocol
Item Description
IPSec Make this setting when you use IPSec.*
Value : Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON.
Item Description
SSL Select whether or not to use SSL.*
Value : Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON.
IPP Security Select the IPP security level.*
Value : IPP/IPP over SSL, IPPoverSSL only
HTTP Security Select the HTTP security level.*
Value : HTTP/HTTPS, HTTPS Only
LDAP Security (Ext. Address
Book) Select the communication protocol according to the type of security employed by the LDAP
server.
Value
Off: Do not use security employed by the LDAP server.
SSL/TLS: Encryption is applied to any data communication. To enable LDAP security, the
LDAP port may have to be changed according to the server settings. Typically, 636** for SSL/
TLS is well-known LDAP port.
STARTTLS: Encryption is applied to any data communication. Typically, 389** for STARTTLS is
well-known LDAP port.
NOTE : LDAP must be set to [On] in Protocol Detail on page 9-20 .
** You can change the port number using COMMAND CENTER.
LDAP Security (User Property)
SMTP Security Select the communication protocol according to the type of security employed by the SMTP
server.
Value
Off: Do not use security employed by the SMTP server.
SSL/TLS: Encryption is applied to any data communication. To enable SMTP security, the
SMTP port may have to be changed according to the server settings. Typically, 465** for SSL/
TLS is well-known SMTP port.
STARTTLS: Encryption is applied to any data communication. Typically, 25** or 587** for
STARTTLS is well-known SMTP port.
NOTE : SMTP must be set to [On] in Protocol Detail on page 9-20 .
POP3 Security (User 1) Select the communication protocol according to the type of security employed by the POP3
server.
Value
Off: Do not use security employed by the POP3 server.
SSL/TLS: Encryption is applied to any data communication. To enable POP3 security, the
POP3 port may have to be changed according to the server settings. Typically, 995** for SSL/
TLS is well-known POP3 port.
STARTTLS: Encryption is applied to any data communication. Typically, 110** for STARTTLS is
well-known POP3 port.
NOTE : POP3 must be set to [On] in Protocol Detail on page 9-20 .
POP3 Security (User 2)
POP3 Security (User 3)