Kyocera Scan System (H), Руководство по эксплуатации

Страница: 13 / 44

Set-up
5
Connecting the scanner to your computer network
Caution
ALWAYS turn the main power switch to the scanner OFF BEFORE connecting the network cable.
1
Turn the main power switch located on the rear left of
the scanner OFF (
).
2 Connect a 10BASE-T or 100BASE-TX cable to the
scanner interface connector located on the rear right of
the scanner.
Important!
NEVER attempt to remove the Scanner Interface Card.
3 Turn the main power switch to the scanner back ON
( | ).