Kyocera KM-6030, Руководство по обслуживанию

Страница: 448 / 463

2FB/2FC-2.0
2-4-10
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Fuser
section Lower cleaning roller Replace Every service P.1-6-71
Press roller Replace Every service P.1-6-72
Press roller separation
claws Clean Every service
Cleaning felt Replace Every service P.1-6-73
Fuser thermistor Check and
replace Every service Replace if the film is
scraped. P.1-6-75
Fuser heater M/S/L Check and
replace Every service Replace if it is blackened. P.1-6-76
Heat roller Replace Every service P.1-6-79
Heat roller separation
claws Replace Every service P.1-6-80
Heat roller gear Check and
replace Every service P.1-6-79
Fuser joint gear Replace and
grease Every service When replacing with the
new gear, after cleaning the
shaft, apply grease EM-50L
to the gear inside. P.1-6-79
Fuser eject upper
roller Replace Every service Replace after feeding
1000,000 sheets. P.1-6-81
Gear 88 fuser Grease Every service Apply grease EM-50LS.
Guides Clean Every service Clean with alcohol or a dry cloth.
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Duplex
section Rollers Clean Every service Clean with alcohol or a dry cloth.
Guides Clean Every service Clean with alcohol or a dry cloth.
Duplex feedshift sole-
noid Check and
replace Every service
Duplex switchback
solenoid Check and
replace Every service Run maintenance item U922
to check and clear the count. P.1-4-72
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Feedshift
section Feedshift solenoid Check and
replace Every service Run maintenance item U922
to check and clear the count. P.1-4-72
Rollers Clean Every service Clean with alcohol or a dry cloth.
Guides Clean Every service Clean with alcohol or a dry cloth.